EXIDE AGM batteries are ideally suited for vehicles with Start-Stop system, for cars with high electric equipment as well as vans and for vehicles with brake energy recovery system.
The latest generation technology approves an excellent current draw and a 4 times higher cycle stability than a standard battery. This starter battery has the highest safety features, is leak-proof due to fixed electrolytes and can be tilted up to 90°. A gas recombination VRLA is regulated by a valve.
Important!
When changing the battery, the new Start-Stop battery must be registered in the vehicle management system.
Our recommendation: Battery changing device BRT-12
If an AGM battery is installed at the factory, it may only be replaced again with an AGM battery.
Features:
- good starting behaviour, even with a low state of charge
- high cycle stability
- suitable for vehicles with high energy requirements due to a lot of additional equipment
- spill-proof, can be installed at an angle
Technical data:
- voltage: 12V
- Battery capacity: 60Ah
- Height: 190mm
- Width: 175mm
- length: 242mm
- cold test current: 680A (EN)
- Pole arrangement: 0
- Bottom strip version: B13
Application:
- for vehicles with start-stop System
- middle and luxury class cars
- SUV
- TRUCKS
| Voltage [V]: | 12 V |
| Technology: | AGM |
| Hold down: | B13 |
| Polarity: | 0 = positive pole right |
| dimensions (lxbxh): | 242 x 175 x 190mm |
| Terminal: | S.A.E. POST |
| Capacity (C20) [Ah]: | 60 Ah |
| Cold Cranking Amps: | 680A (EN) |
| Item weight: | 18,20 kg |
