ACCU-24 NM08.4-S Emergency light device for use in Gessler luminaires
The emergency lighting modules NM08 operate up to 5 pieces of 1W power LEDs (350mA). During operation or during tests, the electronics evaluate faults such as lamp faults, battery voltage faults, charge faults and temperature faults and displays these via a two-color LED. The entire electronics are accommodated in a module housing in a contact-protected manner. The module is suitable for installation in enclosures, where a contact protection according to VDE is not guaranteed with open electronics. The modern circuit design ensures the highest possible energy efficiency with minimal heat generation.
Self-monitoring electronics with EmLOC bus connection for central testing and configuration.
Technical specifications:
Mains voltage: 230 V / 50 - 60 Hz
Connection: max. 5W (5xLED 1W) min. 1W (1xLED 1W). The number of connected LEDs is determined automatically during commissioning and verified each time the system is switched on.
Battery voltage: NC battery 3,6V - 1h = 1,5Ah / 3h = 4Ah
Battery charging: Fast charge (350mA) with switching to pulsating maintenance charge
Operating temperature (at tu = 20 ° C): approx. 36 ° C
Operating temperature range: -20 ° C to + 40 ° C
Standby consumption: approx. 3.6W
Load table:
Number of LED / battery power
1 LED - 280mA
2 LED - 570mA
3 LED - 850mA
4 LED - 1130mA
5 LED - 1400mA
The required battery capacity can be calculated from the indicated current measurements. A reserve should be submitted due to age-related capacity loss.
| dimensions (lxbxh): | 50 x 108 x 33mm |
| Item weight: | 0,20 kg |